Where your research begins maturing.
The research and development configuration of the 3D-Bioplotter: three printhead stations, automated calibration, an upgradable build platform and the same core hardware and software as the Manufacturer Series.
Repeatable. Automated. Translational.
Research that can't be repeated can't be translated. The Developer Series is built so the result you get today is the one you get next month, with less time spent on setup, and a clear route from the bench to the clinic.
Repeatable
A Swiss-made 3-axis extrusion system on a vibration-resistant frame, temperature curves with up to five set points, and editable material and inner-pattern databases. A log file after every print records the material parameters and project settings, so any run can be reproduced.
Automated
Light-sensor XYZ calibration to 30 µm, automatic substrate height detection, needle tip cleaning and background recalibration. An industrial PC with automatic backup keeps every project safe. Less setup, fewer operator variables.
Translational
Same core hardware, software and build envelope as the Manufacturer Series, so proven print files carry straight across. The 3D-Bioplotter platform is behind the first FDA 510(k)-cleared 3D-printed regenerative bone graft, made by a 3D-Bioplotter customer.
Develop on one.
Manufacture on the other.
The Developer Series shares its core hardware, software and build envelope with the Manufacturer Series. The parameters you prove here are the ones you take into production.
-
01 · Developer SeriesDevelopMaterials, geometry and parameters
-
02 · Same softwareTransferMove proven print files across platforms
-
03 · Manufacturer SeriesManufactureCalibrate, print, log, repeat
Every printhead, ready to try
Run up to three printheads in one build, chosen from the same family of eight the Manufacturer Series uses. Two come as standard.
Built on 25 years of published research
Developed at the University of Freiburg and launched in 2000, the 3D-Bioplotter has been used across nearly 1,000 peer-reviewed studies. Start from where the field already is.
Bone regeneration
Soft tissue · Cartilage
Cell printing
Vascular · Drug release · More
Developer vs Manufacturer Series
| Developer Series Research & development |
Manufacturer Series Commercialization |
|
|---|---|---|
| Printhead stations | 3 (2 printheads standard) | 5 |
| Calibration | Light sensor · 30 µm XY and Z | HD camera · 9 µm XY, 1 µm Z |
| Build platform | Upgradable, temperature control optional (−10 °C to 80 °C) | Temperature-controlled, standard |
| Photo logs | Not available | Included |
| Sterile & particle filters | Standard | Standard |
| Build envelope | 200 × 220 × 140 mm | 200 × 220 × 140 mm |
| Footprint | 976 × 623 × 773 mm | 976 × 623 × 773 mm |
| Core hardware & software | Shared | Shared |
Moving toward a product? See the Manufacturer Series.
Specifications
- Footprint
- 976 × 623 × 773 mm
- Weight
- 90–130 kg, depending on model
- Power
- 100–240 VAC, 50/60 Hz
- Compressed air
- 6–10 bar
- Tips
- Luer Lock, 0.1–1.2 mm ID
- File input
- STL and 3MF, automatic volume supports
Upgrades & support
Starting a translation project?
Tell us what you want to print. We'll configure a Developer Series system around your research.
For the benefit of patient care